Wheelchair Assembly
Janice
Last Update 2 maanden geleden
Assembling a wheelchair may vary depending on the specific model and brand.
However, here are some general steps to help you assemble a standard manual wheelchair.
1. Unpack and lay out all the components: Start by unpacking the wheelchair and laying out all the components on a clean and flat surface. Make sure you have all the necessary parts before proceeding.
2. Attach the rear wheels: Most manual wheelchairs have removable rear wheels. Align the axle holes on the rear wheel with the axle stubs on the wheelchair frame. Push the wheel onto the axle stubs until it clicks into place. Repeat the same process for the other rear wheel.
3. Attach the front casters: Locate the front caster forks on the wheelchair frame, usually located near the footrests. Slide the caster stem into the caster fork until it is fully inserted. Make sure it is securely in place and can rotate freely.
4. Attach the footrests: Position the footrests near the front caster forks. Slide the footrest posts into the designated holes on the wheelchair frame until they click into place. Adjust the footrests to the desired height and angle, and tighten any locking mechanisms if applicable.
5. Adjust the seating position: Adjust the seat depth and backrest height according to: